Sequest-All EMC Water Treatment

Sequest-All® EMC is a proprietary blend of medium and short chain phosphates and linear chain polyphosphates specifically manufactured to maximize the sequestration of mineral ions including iron, manganese, calcium etc., in potable and irrigation water systems. Sequest-All® EMC is formulated to successfully treat potable and industrial water systems to furnish the following system benefits. The product is uniquely designed to function effectively at high water temperatures.

Our most specifically designed mineral sequesterant of naturally occurring minerals (such as iron, manganese, calcium, etc.) found in potable and irrigation water sources. Sequest-All® EMC minimizes the potential for rusty and/or dirty water though out the water system.
Reduced mineral scale buildup (by sequestration and dispersion) on the interior surface of the water distribution system - Sequest-All® EMC decreases tuberculation while increasing the carrying capacity of the system.
Maintain water clarity through functional sequestration and mineral scale control - resulting in fewer customer water complaints and reduced flushing requirements.
Sequest-All® EMC is also a very effective deflocculant that breaks up aggregates into fine particles. This function helps to remove particles from surfaces to provide a cleansing action throughout the water system. It is an ideal treatment to use in Industrial cleaning operations.
Reduce the demand for chlorine because of the stabilization of minerals and reduction of scale deposits - effectively improving disinfection throughout the water distribution systemwhile providing effective corrosion inhibition.
Gradual removal and inhibition of mineral scale deposits formations in hot water lines and residential water heaters.
Since Sequest-All® EMC is formulated with highly stable ingredients, the treatment remains effective over longer periods of time than standard phosphate treatments.


	Sequest-All® EMC blended phosphate can be applied to a water system by a chemical injection metering pump once liquified with water. Sequest-All® EMC goes very easily into solution with agitation in concentrations of up to 5 lbs per gallon of water. Typical potable water treatment dosages range from 0.75 to 3.75 and higher for non-potable systems.


	NOTICE The information herein is to our knowledge true and accurate. All information appearing on this document is based on data obtained from the manufacturer and/or recognized technical sources. Because of conditions beyond our control, we make no warranty or representation, expressed or implied, except that the product discussed herein conform to the chemical descriptions shown on their labels/product data. Information is supplied upon the condition that the persons receiving same will make their own determination as to its suitability for their purposes prior to use. In no event will SPER Chemical Corporation be responsible for damages of any nature whatsoever resulting from the use of or reliance upon information or the product to which the information refers. No agent, representative or employee of this company is authorized to vary any of the terms of this notice.


	Contact us Toll Free at: 877-535-9033