Sequest-All Granular Water Treatment

Sequest-All® is a proprietary blend of high quality domestically (US) produced phosphates and polyphosphates specifically formulated to successfully treat potable and non-potable water systems to furnish the following system benefits. This product is uniquely designed to function effectively at high water temperatures.

Control the naturally existing minerals (such as iron, manganese, calcium, etc.) found in potable water sources - minimizing the potential for rusty and/or dirty water thoughout the water system.
Reduce mineral scale buildup (by sequestration / chelation and dispersion) on the interior surface of the water distribution system - decreasing tuberculation while increasing the carrying capacity of the system.
Maintain water clarity through functional sequestration and mineral scale control - resulting in fewer customer complaints and reduced flushing requirements.
Inhibit corrosion of steel distribution water lines along with iron and galvanized pipes and residential copper and lead plumbing.
Inhibiting lead and copper leaching by forming a protective coating on the interior surface of the pipe - effectively lowering lead and copper levels making it an ideal treatment for the Lead and Copper rule.
Reduce the demand for chlorine because of the stabilization of minerals and reduction of scale deposits - effectively improving disinfection throughout the water distribution system.
Gradual removal and inhibition of mineral scale deposits formations in hot water lines and residential water heaters.
Since Sequest-All® is formulated with highly stable ingredients, the treatment remains effective over longer periods of time than standard phosphate treatments.


	Sequest-All^® blended phosphate can be applied to a water system by a chemical injection metering pump once liquified with water. Sequest-All^® goes easily into solution with agitation in concentrations of up to 5 lbs per gallon of water. Typical potable water treatment dosages range from 0.75 to 3.75 mg/L and higher for non-potable systems.


	NOTICE The information herein is to our knowledge true and accurate. All information appearing on this document is based on data obtained from the manufacturer and/or recognized technical sources. Because of conditions beyond our control, we make no warranty or representation, expressed or implied, except that the product discussed herein conform to the chemical descriptions shown on their labels/product data. Information is supplied upon the condition that the persons receiving same will make their own determination as to its suitability for their purposes prior to use. In no event will SPER Chemical Corporation be responsible for damages of any nature whatsoever resulting from the use of or reliance upon information or the product to which the information refers. No agent, representative or employee of this company is authorized to vary any of the terms of this notice.


	Contact us Toll Free at: 877-535-9033


	Sequest-All® is a proprietary blend of high quality domestically (US) produced phosphates and polyphosphates specifically formulated to successfully treat potable and non-potable water systems to furnish the following system benefits. This product is uniquely designed to function effectively at high water temperatures.

	Control the naturally existing minerals (such as iron, manganese, calcium, etc.) found in potable water sources - minimizing the potential for rusty and/or dirty water thoughout the water system. Reduce mineral scale buildup (by sequestration / chelation and dispersion) on the interior surface of the water distribution system - decreasing tuberculation while increasing the carrying capacity of the system. Maintain water clarity through functional sequestration and mineral scale control - resulting in fewer customer complaints and reduced flushing requirements. Inhibit corrosion of steel distribution water lines along with iron and galvanized pipes and residential copper and lead plumbing. Inhibiting lead and copper leaching by forming a protective coating on the interior surface of the pipe - effectively lowering lead and copper levels making it an ideal treatment for the Lead and Copper rule. Reduce the demand for chlorine because of the stabilization of minerals and reduction of scale deposits - effectively improving disinfection throughout the water distribution system. Gradual removal and inhibition of mineral scale deposits formations in hot water lines and residential water heaters. Since Sequest-All® is formulated with highly stable ingredients, the treatment remains effective over longer periods of time than standard phosphate treatments.